LIMAX2CP安全传感器轴套和安全功能集成在一个壳体中
•在一个机壳中检测高达130 m的绝对机舱位置，并提供与安全相关的开关和控制功能•可以实现多种电梯和安全功能：超速，最终限值监控，ETSL，延迟，门区域功能，无意的轿厢运动UCM，根据EN 81-20、21和EN 81-50的检查和启动功能，测试 用于无意桥接轿厢和层门
•完整的安全机制是电子设计的
•紧凑的设计，也适合最小的安装空间
•通过消除轴中的组件来节省大量成本
•安全功能可以根据现场升降系统灵活调整
•磁带技术的优点：对灰尘和烟雾不敏感，安装快速
•快速简便的安装
•根据EN 81-20进行的欧盟型式试验，根据EN 61508的SIL3进行试验
MECHANICAL DATA
| Measuring principle | absolute redundant |
| Repeat accuracy | ± 1 increment |
| System accuracy in µm at 20 °C | ± (1000 + 100 x L) L= measuring length in meters |
| Distance sensor/ tape | correct distance is guaranteed by the magnetic tape guidance |
| Housing material | aluminium |
|
Housing dimensions (L x W x H) |
3745 x 120 x 40 mm |
| Required magnetic tape | AB20-80-10-1-R-D-15-BK80 |
| Basic pole pitch (magnetic tape) | 8 mm |
| Max. measuring length | 130 m |
| Connections | Wago connectors for supply CAN interface digital inputs and safety circuit |
| Sensor cable PIO SCA | standard length 3 m others on request |
| Weight | approx. 980 g without cable cable: approx. 60 g per meter |
ELECTRICAL DATA
| Power supply voltage |
10 ... 30 VDC stabilized 48 V on request; Note: a PELV power supply must be used! |
| Residual ripple | < 100 mV |
| DZO output | +24 VDC - 20% max. 200 mA (push-pull) |
| Rev. polarity protection | integrated |
| Current consumption | max. 150 mA at 24 VDC |
| Interface | CANopen CiA 406 or 417 |
| Resolution | configurable up to 62.5 µm factory setting: 1 mm |
| Max. operating speed | 6 m/s |
| Digital input voltage | 18 ... 30 VDC for HIGH level (48 V on request); open for LOW level |
| Safety circuit | 0 ... 230 VAC 50/60 Hz (max. 250 VAC) max. 2 A; with resistive/inductive load with L/R < 40 ms |
| External supply of eSGC-actuator | according to supply voltage; restrictions for connected trip coil must be observed |
MISCELLANEOUS
| Max. operating time | 20 years |
| Reaction time of actuators | < 30 ms |
CONFORMANCE / STANDARDS / CERTIFICATION
| Achived SIL | SIL3 (TÜV-certified) according to EN 61508 |
| Fulfilled standards | EN 81-20 / EN 81-21 / 72 (fire brigards) |
| Type-examination | EU type examination acc. to EN 81-20 SIL3 test acc. to EN 61508 Chinese standard TSG T7007-2016 |
ENVIRONMENTAL CONDITIONS
| Storage temperature | -20 ... +85 °C |
| Operating temperature | -20 ... +65 °C |
| Humiditiy | 95 % not-condensing |
| Operating height | max. 2000 m above sea level |
| Protection class | IP43 IP54 or IP65 (acc. to EN 60259) |
| Interference emission/ immunity | EN 12015 / EN 12016 |
| Vibration/ shock resistance |
EN 60068-2-6 EN 60068-2-27 EN 60068-2-29 |