Z25单轴位置指示器/计数器可扩展编程脉冲计数器，用于单轴
带单轴信号输入的位置指示器适用于传统的旋转和线性编码器以及埃尔格增量式和绝对式测量系统
可调参考值，移位补偿量和锯片宽度
LCD显示器，带7位数字、符号和测量单位
2个可编程数字控制输入
断电时数据存储
MECHANICAL DATA
| Housing | norm panel housing |
| Housing material | ABS plastic, black |
| Housing dimensions (W x H) | 72 x 48 mm (without seal), 74 x 50 mm (with seal) |
| Panel cut out (W x H) | 68 x 45 mm |
| Keyboard | foil with short stroke keys |
| Installation depth | 27 mm (without connectors) |
ELECTRICAL DATA
| Display | 7 digit LCD (digit height: 14 mm) with sign and measurement units |
| Perspective | 12 o'clock |
| Measurement units | mm, m, Inch, RPM or ° |
| Accuracy | ± 1 digit |
| Power supply voltage | 24 VDC ± 0 % |
| Current consumption | 25 mA (without measuring system) |
| Encor supply | 24 VDC |
| Load by encor/ measuring system | max. 300 mA |
| Singnal inputs | HTL, TTL or RS422 (order designation) |
| Signal channels | A, B bzw. A, A', B, B', Z, Z' or RxD+, RxD- |
| Maximum input frequency | 80 kHz |
| External inputs | 2 control inputs (24 V, PNP) |
| Connection | puggable screw terminals and 9 pin (female) D-SUB (only RS422, TTL) |
| Power down memory | FRAM |
| Optional accessories | external power pack NG24.0 |
ENVIRONMENTAL CONDITIONS
| Operating temperature | 0 ... +50 °C |
| Storage temperature | -20 ... +80 °C |
| Humidity | max. 80 %, non-condensing |
| Protection class (front) | IP54 installed state (with seal), IP43 installed state (without seal) |
| Protection class (rear) | IP40 |