Z60三轴位置指示器/计数器可编程通用位置指示器,用于三轴
位置指示器,配有1个信号输入,最多可用于3个轴输入可用于传统编码器以及埃尔格测量系统(增量式或绝对式)
可调节参考值,移位补偿量和锯片厚度
每个轴的数字控制输入(可配置)
可选择脉冲、速度和同心度模式
2个开路漏极和2个继电器输出
可选模拟输出
断电时数据存储
串行RS232接口
MECHANICAL DATA
Housing | norm panel housing |
Housing material | aluminium |
Housing dimensions (W x H) | 96 x 72 mm |
Panel cut out (W x H) | 93 x 67 mm |
Keyboard | foil with short stroke keys |
Installation depth | 33 mm (without connectors) |
ELECTRICAL DATA
Display | graphic LCD display 120 x 180 pixels |
Perspective | 6 o'clock |
Measurement units | mm, m, Inch, RPM oder ° |
Accuracy | ± 1 digit |
Power supply voltage | 24 VDC ± 20 % |
Current consumption | 120 mA (without measuring system) |
Encor supply | 24 VDC or 5 VDC (order designation) |
Load by encor/ measuring system | max. 300 mA |
Singnal inputs | HTL, TTL, or RS422 (order designation) |
Signal channels | A, B, Z bzw. A, A', B, B', Z, Z' or RxD+, RxD- |
Maximum input frequency | 100 kHz, 500kHz on request |
External inputs | 3 control inputs (24 V, PNP) |
Analog inputs | optional: 0 ... 10 V or 0 ... 20 mA on request |
Relay outputs | 2 potential free shutters (24 VDC / max. 1 A) |
External outputs | 2 open drain outputs |
Analog outputs | optional: 0 ... 10 V or 4 ... 20 mA |
Interfaces | RS232 |
Connections | pluggable screw terminals and 9 pin female D-SUB (for third axis) |
Power down memory | FRAM |
optional accessories | external power pack NG24.0 |
ENVIRONMENTAL CONDITIONS
Operating temperature | 0 ... +50 °C |
Storage temperature | -40 ... +70 °C |
Humidity | max. 80 %, non-condensing |
Protection class (front) | IP43 (installed state) |
Protection class (rear) | IP40 |