中文 DE EN US JPN
Sprache

Z58单轴位置指示器/预置计数器预置计数器,用于增量式和绝对式测量系统

处理增量式和绝对式信号
RS232接口
断电时数据存储
比例因数和边缘倍增因数
数字亮度控制
3个外置输入
英寸/毫米模式
2 个常开继电器输出(可选)(0到10 VDC或0 (4)到20 mA)
模拟输入(可选)用于流量计显示(0到10V 或 0到20 mA)

MECHANICAL DATA

Housing norm panel housing
Housing material aluminium, black
Housing dimensions (W x H) 96 x 72 mm
Panel cut out (W x H) 93 x 67 mm
Keyboard foil with short stroke keys
Installation depth 78 mm with screw teminals,115 mm with D-SUB connector

ELECTRICAL DATA

 
Display 6 digit LED display (red, digit height: 14 mm)
Accuracy ± 1 digit
Power supply voltage 24 VDC ± 20 %
Current sonsumption 70 mA (without measuring system)
Encor supply 24 VDC 
Load by encor/ measuring system max. 75 mA
Signal input HTL or TTL
Signal channels A,B bzw. A, A', B, B', Z, Z' or RxD+, RxD-, TxD+, TxD-
Maximum input frequency  100 kHz, optionally 500 kHz
External outputs 3 control inputs (24 V, PNP)
Analog inputs optional: 10 Bit, 0 ... 10 VDC or
0 ... 20 mA
Relay outputs 2 potential free shutters (24 VDC / max. 1 A)
Analog outputs optional: 12 Bit, 0 ... 10 VDC (max. = 5mA) or 0 (4) ... 20 mA (Rmax = 200 ? )
Interfaces RS232, SSI as absolute signal input, on request 
Connections pluggable screw terminals and (depending on version) 9 pin (female) D-SUB
Power down memory EEprom
Optional accessories external power pack NG24.0

ENVIRONMENTAL CONDITIONS

 
Operating temerature 0 ... +50 °C
Storage temperature -20 ... +80 °C
Humidity max. 80 %, non-condensing
Protection class (front) IP43 installed state
Protection class (rear) IP40