带总线连接的PLMIX2增量磁编码器
PLMIX2是一种小型磁性测量系统，分辨率高达5µm。传感器增量测量并具有CANopen接口。得益于CANopen接口，PLMIX2可以以节省空间的方式轻松连接到现有的总线系统。这一独特的概念减少了布线和布线工作，从而简化了电气安装，尤其是在多个传感器与控制器通信的应用中。极其紧凑的读取头可以安装在距离磁带2.0毫米的地方。
- 带CANopen接口的增量式传感器
- 非常紧凑的外壳
- 分辨率高达0.005 mm
- 允许读取距离高达2 mm
- 直接非接触测量
- 理论上无限测量长度
MECHANICAL DATA
| Measuring principle | incremental |
| Repeat accuracy | ± 2 increments, depending on application and instalation position |
| System accuracy in µm at 20 °C | ± (25 + 20 x L), L= measuring length in meters |
| Reading distance | max. 2 mm |
| Sensor housing material | zinc die cast / plastic |
|
Housing dimensions (L x W x H) |
37 x 12.5 x 25 mm |
| Required magnetic tape | MB20-10-10-1-R |
| Pole pitch | 5 mm |
| Max. measuring length | theoretically unlimited |
| Connections | M12 connector 5 pin |
| Sensor cable | 0,2 m standard length, others on request |
| Sensor cable bending radius | 60 mm |
| Weight | approx. 35 g without cable, cable: approx. 60g/m |
ELECTRICAL DATA
| Power supply voltage | 10 ... 30 VDC |
| Residual ripple | 10 ... 30 VDC: <10 % |
| Current consumption | max. 150 mA |
| Output signals | CAN 5 VDC output driver, supply voltage |
| Resolution (at 4 edge evaluation) | 5 µm |
| Max. update time | 250 µs, depending on bitrate |
| Max. output frequency per channel | 1 MHz, higher on request |
| Max. operating speed | 4 m/s |
ENVIRONMENTAL CONDITIONS
| Storage temperature | 0 ... +60°C |
| Operating temperature | 0 ... +60 °C, -25 ... +85 °C on request |
| Humidity | 80 %, non-condensing |
| Protection class | IP54 |