EMIX1X测量系统，分辨率为0.001mm，是精密电机反馈的理想选择
- 非接触扫描的磁性测量原理
- 带有集成评估电子设备的紧凑型传感器头
- 速度比例方波输出
- 分辨率1µm（4边触发时）
- 预定用于线性电机
- 包括周期性指数脉冲输出
- 用于读取距离监控的LED
- 安装快速方便
- 高IP67防护等级
MECHANICAL DATA
| Measuring principle | incremental |
| Repeat accuracy | ±2 µm |
|
System accuracy in µm at 20 °C |
± (20 + 20 x L) L = measuring length in meters |
| Reading distance sensor - tape | max. 0.8 mm |
| Housing material | zind die cast |
|
Housing dimensions (L x W x H) |
37 x 10 x 15 mm |
| Required magnetic tape | MB20-20-10-10-1-R-X-EPS |
| Magnetic tape pole pitch | 2 mm |
| Max. measuring length | theoretically unilimited |
| Connections | open cable ends (connectors optionally) |
| Sensor cable | 1.5 m standard length, others on request, drag chain suitable |
| Cable bending radius | min. 60 mm |
| Weight | approx. 35 g without cable, cable approx. 60 g/m |
ELECTRICAL DATA
| Power supply voltage | 5 VDC |
| Residual ripple | ±25 mV |
| Current consumption | max. 200 mA |
| Output signals |
A, A', B, B', Z, Z' push-pull,durable short circuit proof |
| Outpult level | TTL |
| Output current / channel | max. 20 mA |
|
Encoder resolution (at 4-edge triggering) |
0.001 mm |
| Index pulse (Z/Z') | every 2 mm periodically |
| Output frequency / channel | 1 MHz, higher on request |
| Operating speed | max. 2 m/s |
ENVIRONMENTAL CONDITIONS
| Storage temperature | -25 ... +85 °C |
| Operating temperature | -10 ... +70 °C, -25 ... +85 °C on request |
| Humidity | max. 95 %, non-condensing |
| Protection class | IP67 |