RMIX2增量式测量系统长度、位置、角度和转速的测量

用于长度和角度的测量
分辨率可达0.025毫米（4边沿触发时）
高防护等级IP67
传感器和磁尺距离可达0.6毫米
标准极环：72毫米、38毫米和19.75毫米（直径）
内置霍尔传感器元件并作为单片内插
非常耐用、抗污

MECHANICAL DATA

Measuring principle	incremental - rotative
Repeat accuracy	± 1 increment
System accuracy in µm at 20 °C	± (25 + 20 x L), L= measuring length in meters
Distance sensor / tape	max. 0.6 mm
Sensor housing material	ABS plastic
Housing dimensions (L x W x H)	50 x 12 x 25 mm
Required magnetic tape	MB20-20-10-1-R resp. pole ring: 72, 38 or 19,75 mm (diameter)
Pole pitch	2 mm
Max. measuring length	theoretically unlimited
Connections	open cable ends
Sensor cable	1.5 m standard length, others on request, drag chain suitable
Sensor cable bending radius	60 mm
Weight	approx. 40 g without cable, cable: approx. 60 g/m

Power supply voltage	10 ... 30 VDC or 5 VDC
Residual ripple	10...30 VDC: <10 %, 5 VDC: ± 25 mV
Current consumption	10 … 30 VDC: max. 150 mA, 5 VDC: max. 200 mA
Output signals	A, A', B, B', Z, Z'
Output levels	HTL or TTL
Output current per channel	max. 20 mA
Resolution (at 4 edge evaluation)	0.025 mm
Index pulse	every 4 mm (periodically),
Max. output frequency per channel	200 kHz
Operating speed	20 m/s
Max. rotation speed	300.000 U/min per number of pole pairs