MAX3紧凑型绝对测量系统非常适合移动自动化中的线性应用
MAX3是一种磁性绝对长度测量系统，设计用于测量最长2450 mm的长度。由于其紧凑的设计、非接触和无磨损的测量原理以及其高IP65防护等级，该测量系统特别适合在恶劣环境中使用。因此，MAX3非常适合移动自动化应用。MAX3的一个主要优势是其紧凑的设计，这使得它同样适用于现有机器和车辆的改装和新安装。后续电子设备的可用接口有CANopen (DS406编码器配置文件)或模拟输出信号(V或mA)。- 分辨率为1毫米的绝对编码器
- 无磨损和无接触
- 测量长度可达2450毫米
- 带用于距离控制传感器/磁带的LED
- 接口:CANopen (DS406)或模拟输出
MECANICAL DATA
| Measuring principle | absolute |
| Repeat accuracy | ± 1 increment |
| System accuracy in µm at 20 °C | ± 1 mm at max. 2450 mm measureing length (standard) |
| Distance sensor/tape | min. 0.25 mm, max. 1.0 mm |
| Sensor housing material | galvanized aluminium |
|
Housing dimensions (L x W x H) |
52 x 16 x 30 mm |
| Required magnetic tape | AB20-21-10-1-R-D-10 (10 mm) or AB20-21-20-1-R-D-10 (20 mm) |
| Pole pitch | 2.1 mm |
| Max. measuring length | 2450 mm |
| Type of connection | Standard: open cable ends, optionally: 5-pin M12 round connector (other connectors on request) |
| Sensor cable | 1.5 m standard length, others on request, drag chain suitable |
| Sensor cable bending radius | min. 60 mm |
| Weight | approx. 50 g without cable, cable: approx. 60 g/m |
ELECTRICAL DATA
| Power supply voltage | 10 ... 30 VDC ± 10 % |
| Residual ripple | < 10 % |
| Current consumption | max. 80 mA |
| Interfaces |
CANopen standard (DS406) 12 bit analog output (0 ... 20 mA) 12 bit analog output (4 ... 20 mA) 12 bit analog output (0,5 ... 4,5 V) 12 bit analog output (0 ... 10 V) SSI (binary or Gray) on request |
| Resolution | 1 mm |
|
Max. operating speed |
2 m/s |
| Further options | option A (CANopen without termination resistor) |
ENVIRONMMENTAL CONDITIONS
| Storage temperature | -25 ... +85 °C |
| Operationg temperature | -25 ... +85 °C |
| Humidity | 95 %, non-condensing |
| Protection calass | IP40 (standard), IP65 (option V) |