EMAX2磁性紧凑型绝对线性编码器,带LED距离控制,测量长度可达10m
EMAX2系列是一种绝对长度测量系统。传感器、转换器和插值单元一起放置在一个紧凑的锌压铸外壳中。绝对编码磁带粘贴到一个平原地区。非接触式扫描EMAX2传感器可安装在距离磁带最大1.5毫米的位置。最大测量长度可达10米。根据“DS406”编码器配置文件,可在SSI(可选格雷码或二进制码)、RS422或可寻址RS422或canopen之间选择,或根据ELGO CAN标准协议选择CAN接口。可选A/B方波或1 Vpp正弦/余弦信号增量信号输出,用于动态运动控制。
典型应用包括搬运系统、输送机和存储技术、液压机、冲压机、铸造机、线性滑轨、线性驱动和取放系统。
- 分辨率为10µm的绝对编码器
- 直接和无接触测量
- 测量长度可达10m
- 不需要参考
- 带距离控制传感器/磁带的LED
- 额外的增量方波或正弦余弦信号
- 提供多种接口(CAN、SSI、RS422)
MECHANICAL DATA
Measuring principle | absolute |
Repeat accuracy | ± 1 increment |
System accuracy in µm at 20 °C |
standard resolution 010: ±(150 + 20 x L) resolution option*F10: ±(75+ 20 x L) L= measuring length in meters |
Distance sensor/ tape | max. 1.5 mm 20 mm at reduced measuring accuracy |
Sensor housing material | zinc die cast |
Housing dimensions (L x W x H) |
70 x 16 x 30 mm |
Required magnetic tape | AB20-50-10-2-R-11 |
Pole pitch | 5 mm |
Max. measuring length | 10 m |
Type of connection | 12-pin round connector M12 (external) |
Sensor cable | DKA cable (accessory) length = 5 m others on request |
Required sensor cable | 5 m: DKA-00-RCF0-050-XXXX-12-T-D-S |
Weight | approx. 50 g; cable: approx. 60g/m |
ELECTRICAL DATA
Power supply voltage | 10 ... 30 VDC |
Residual ripple | < 10 % |
Current consumption | max. 150 mA |
Interfaces | SSI (Gray or binary) RS422 addressable RS422 CANopen (DS406 encoder profile) or CAN BASIC ELGO |
Resolution | 0.01 mm |
Max. operating speed | 4 m/s |
Further options | Additional incremental A/B square wave or 1 Vpp sin/cos signals |
ENVIRONMENTAL CONDITIONS
Storage temperature | -25 ... +85 °C |
Operating temperature | -10 ... +70 °C -25 ... +85 °C on request |
Humidity | 95 % non-condensing |
Protection class | IP40 (standard) IP65 (option V) higher on request |