IZ14E测量和显示系统电池供电迷你指示器，配有测量系统
设计小巧7 位数字LCD 显示器
符号、电池状态、单位和“°”字符
可选择显示模式：毫米、米、英寸（有分数显示）
可调计数方向，可调小数点和倍增因数
参考值可设置
按键可锁定
通过嵌入式外壳轻松安装
3个可调整的移位补偿量/可通过参数单独激活
增量式和绝对式测量之间切换
可选1个外置输入，用于特殊功能（5到30 V）
传感器电缆长度可达2.0米
通过内置电池槽2 x AAA电池或通过外置电池槽（例如1 x C [1.5 V]或2 x C [3 V]）供电
MECHANICAL DATA
| Housing | norm panel housing |
| Housing material | plastic, black |
| Housing dimensions (W x H) | 72 x 36 mm |
| Panel cut out (W x H) | 68 x 34 mm |
| Keyboard | foil with short stroke keys |
| Installation depth (complete) | 38 mm |
ELECTRICAL DATA
| Display | 8 digit LCD (digit height 9 mm), with sign, battery status and measurement units |
| Perspective | 12 o'clock |
| Measurement units | mm / inch / m / ° |
| Accuracy | ± 1 digit |
| Power supply voltage | battery (1.5 V resp. 3 V), integrated or external |
| Current consumption | < 1 mA bei 1.5 V, with measuring system |
| Battery service life | 0.5 ... 3 years, depending on battery type |
| Extern inputs | 2 x 5 ... 30 V optionally |
| Connections | fixed cable outlet |
| Data memory | Flash |
ENVIRONMENTAL CONDITIONS
| Operating temperature | 0 ... +50 °C |
| Storage temperature | -10 ... +60 °C |
| Humidity | max. 80 %, non-condensing |
| Protection class (front) | IP54 |
| Protection class (rear) | IP40 |
MAGNETIC SENSOR
| Type designation | MS-250 |
| Dimensions (L x W x H) | 30 x 10 x 15 mm |
| Measuring principle | magnetic, incremental |
| Required magnetic tape | MB-20-25-10-1-R |
| Magnetic tape pole pitch | 2.5 mm |
| Distance sensor/ tape | max. 0.8 mm |
| Resolution | 0.1 ... 0.01 mm |
| Repeat accuracy | ±2 increments |
| Operation speed | max. 4 m/s |
| Housing material | zinc die cast |
| Protection class | IP67 |
| Connections | fixed connection with indicator |
| Sensor cable | drag-chain suitable, 6-wire, twisted pairs and double-shielded |
| Sensor cable length | 0.1 ... 2.0 m |
| Sensor cable bending radius | min. 60 mm |
| Weight | approx. 30 g |
| Humidity | max. 95 %, non-condensing |
| Influence of external magnetic fields | external magnetic fields > 1 mT, which directly impinge upon the sensor, can affect the system accuracy. |