中文 DE EN US JPN
Sprache

AZ16E绝对式测量,带指示器自给自足的绝对式线性编码器,配有位置指示器

自给自足的绝对式线性编码器,配有位置指示器
方便操作者的编程层面
测量长度可至 8 米
外置磁性传感器 (可插入式)
所有参数的永久保存
电池寿命至 4 年
可激活的 AUTO-POWER-OFF 自动节电功能,可设置启动时间
分辨率 0.1毫米
绝对式与增量式互相转换
可选择毫米和英寸模式
英寸模式下有分数表达方式
按键可单个激活或锁定
可设置的参考点以及3个可设置的移位补偿量
所有符号可单个激活或锁定(毫米/英寸/箭头等)

MECHANICAL DATA

Housing norm panel housing
Housing material ABS plastic, black
Housing dimensions (W x H) 96 x 72 mm
Panel cut out (W x H) 93 x 67 mm
Keyboard foil with short stroke keys
Installation depth (complete) approx. 66 mm

ELECTRICAL DATA

 
Display 7 digit LCD with sign, battery state and measurement units
Perspective 12 o'clock
Measurement units mm / inch / m 
Accuracy ± 1 digit
Power supply voltage battery (1.5 V resp. 3 V) integrated or external
Current consumption < 1 mA bei 1.5 V, with measuring system
Battery service life up to 4 years, depending on power-on time
Interface RS485
External inputs 2 x 5 ... 30 V (on request)
External outputs 2 x 30 V open collector (on request)
Optional intefaces RS232, RS485, RF 868 MHz on request
Connections standard: RJ45 socket, optional: fixed cable outlet
Data memory Flash

ENVIRONMENTAL CONDITIONS

 
Operating temperature 0 ... +50 °C
Storage temperature -10 ... +60 °C
Humidity max. 80 %, non-condensing
Protection class (front) IP54 
Protection class (rear) IP40

MAGNETIC SENSOR

 
Type designation AZS-100 (standard), AZS-50 (on request)
Dimensions (L x W x H) 100 x 12 x 25 mm
Measuring principle magnetic, absolute
Required magnetic tape AB20-40-10-1-R-11
Magnetic tape pole pitch 4 mm
Distance sensor/ tape 1.5 mm
Resolution 0.1 mm
Repeat accuracy ±2 increments
Interface (absolute) RS485
Maximum measuring length 8.0 m
Housing material plastic ABS
Protection class IP67
Connections RJ45 (male) connector
Sensor cable drag-chain suitable, high-flexible, 4-wire/ shielded
Sensor cable length 1, 2, 3, 5 m, others on request, maximum cable length 20 m
Sensor cable bending radius min. 25 mm
Weight approx. 40 g
Humidity max. 95 %, non-condensing
Influence of external magnetic fields external magnetic fields > 1 mT, which directly impinge upon  the sensor, can affect the system accuracy.